Technomate TM500S Super

Technomate TM500S Super

Technomate TM500S Super Linux based Satellite receiver with Linux Open Source Enigma 1 Firmware, Unlimited TV/Channel Storage, Smart EPG, Parental Control, Full auto service scan, DiSEqC 1.2, Smart Electronic Programme Guide and it even has a Multi-Language menu! Firmware Updates available here

It also has: Smartcard Reader, 2x Scart Outputs, RF Modulator, Smart Card Reader, Super Sensitive Tuner, Internal Power Supply and Optical S / PDIF

Features

• Ethernet Port
• RF Modulator
• New Remote Control Design
• Sensitive Tuner
• 2 Scart Connections

Specification

    * Super Upgrades 16MB Flash 72MB SD RAM
    * Smart Card Reader
    * Fully MPEG-2 & DVB-S Compliant
    * Linux Open Source: Standard Linux API
    * Firmware/ Software Upgrade: Through Serial (RS232S) & Ethernet
    * Unlimited TV/ Radio Channel Storage
    * 10/100M Full Duplex Ethernet Interface
    * Full Automatic Service Scan
    * Smart Electronic Program Guide (EPG)
    * OSD Teletext & Subtitle Supported
    * Variable Aspect Ratio (4:3, 16:9, Letter Box)
    * Multi-Language Menu
    * Parental Control
    * LNB Loopthrough
    * DiSEqC 1.2
    * DVB-S Tuner
    * Microprocessor Type: PowerPC Processor 252MHz/ 350MIPS
    * RS232C Serial Port
    * 4 Digit LED Display
    * RF Modulator (ANT IN/TV OUT)
    * Digital Audio Optical Output (S/PDIF)
    * 2 Scart Connections

PLEASE NOTE: This receiver is supplied with FTA firmware only.

 Below are 37 extra Technomate functions that are not available on Dreambox DM500/DM600 receivers

Based on New s/w for tm-500 Super /600  Dated from 09-01-2011
-----------------
For TM500S Super and TM600S hot key functions, ect, are below

1-press info 2 times see signal and all other info also use arrow I/R for more info
2-Press LAN to see full LAN info and edit,
3-Press RED button to download softcam key...no need of doing one by one from each sight..auto find about 5 sights.
5-Press <  below number 7 to update LAN connection
6-press edit direct access to edit menu
7-press UHF direct to uhf menu also you can see uhf channel number in the front panel no need scanning you TV for 2nd room.
8-To download s/w {image } no need of any password or control centre ..hold standby button and turn on from rear  see 2 or 3 digits of box ip ..
then use explorer in windows type 192.168.1. ???   then last digits of box ip press enter ..that's all.Mini Web
9-for C:line F:line and other upload download use same  as number 8
10-RF modulator 65 db gain
11-RGB loop from 2 scarts for rgb recording,
12-Image download direct ..no need of pc [ press LAN=BLUE Button  
13-press blue button 2 times see choice of cams/old cams/extras /channel lists up to date
14-press ok  then L/R to see list and change channel
15-Delete channel list direct..press blue button then go to add-on manger highlight the list press red button to delete..no need factory rest or re boot.
16-To test if LAN connected or not..press LAN button ,,you can see in the front panel neon bulb going up/down trying to re connect or giving message some thing wrong.
17-sat button ..direct access to satellite list
18-Diseqc and usals works 100% perfect for motorised dish.to increase speed when motor moving in 18 volt Horizontal ,
19-Internal power supply
20-54 key functions remote control
21-8 Functions front panel keys.
22-10-segments front display
23-quick factory reset,
24-Sound quality improved by using high quality HIFI pre amplifier Line out as well as optical out,

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: