Chimney Lashing Kit ( 12 inch )

Chimney lashing brackets are manufactured to the highest standards with full welds. The raw materials used in the manufacturing of this bracket are mild steel angle iron, measuring 40mm x 40mm x 3mm, mild steel flat, measuring 25mm x 5mm The bracket is also finished with hot dipped galvanising.

This bracket is used to attach a 2in OD pole to a chimney stack so that you can put up a TV Aerial. Steel poles are readily available from your local hardware shop or builders merchant.

LIST OF COMPONENTS
1 X 12" Chimney bracket, galvanised
1 X 17' lashing wire
2 X J bolts
2 X 2" V bolts
3 X Corner plates
1 X Plastic eye

MAXIMUM CAPACITIES
This bracket has maximum mast size of 10' (3m approx) It is manufactured to use 2" V bolts for up to 2" diameter masts. The bracket can also use 3" V bolts, which allow the use of 3" diameter masts or 2" plastic grommets with aluminium masts. The bracket allows a maximum clearance of 2½" from chimney to mast when using 2" V bolts.

Buy your Chimney Lashing Kit from Satellitetvshop.co.uk your free UK delivery store.