Chimney Lashing Kit ( 9inches )

Chimney brackets are manufactured to the highest standards with full welds. The raw materials used in the manufacturing of this bracket are mild steel angle iron, measuring 40mm x 40mm x 3mm 2. mild steel flat, measuring 25mm x 5mm.
The bracket is also finished with hot dipped galvanising. You will also need 1.5in OD steel pole which you can purchase here or your local hardware shop or builders merchant

Used to mount all our Aerials on to a chimney stack.

LIST OF COMPONENTS.

1 X 9" Chimney bracket, galvanised
1 X 17' lashing wire
2 X J bolts
2 X 1½" V bolts
3 X Corner plates
1 X Plastic eye

MAXIMUM CAPACITIES
This bracket has maximum mast size of 6' (2m approx) It is manufactured to use 1½" V bolts for up to 1½" diameter masts. The bracket can also use 2" V bolts, which allow the use of short 2" diameter masts or 1½" plastic grommets with aluminium masts. The bracket allows a maximum clearance of 3" from chimney to mast when using 1½" V bolts

Buy your Chimney Lashing Kit from Satellitetvshop.co.uk your free UK delivery store.